BOKSBURG · GAUTENG

Forklift Training Benoni
TETA-Accredited Forklift Operator Certificate at Our Germiston Campus

United Training Centre trains Boksburg job-seekers for their TETA-accredited Forklift Operator certificate at our Germiston campus — just a short drive away, bordering Boksburg to the west. The 7-day course costs R1,700, follows SAQA Unit Standard 242974 (Operate Counter-Balanced Lift Truck, NQF Level 3), and results in a certificate recognised across Boksburg’s manufacturing, steel and logistics employers.

Benoni’s Apex Industrial estate hosts Apex Cordset Technologies, Africa’s largest power cord manufacturer, alongside a dense base of engineering firms including Anicic Heavy Engineering, which builds mining conveyors, mills, crushers and cranes. Sitting roughly 15 minutes from OR Tambo International Airport with direct access via the N12, R21 and R23, Benoni is increasingly attracting logistics and warehousing operators too — all of it creating consistent demand for certified forklift operators.

No overnight travel required — Benoni is a short drive from our Germiston campus. Free accommodation is available if you’d prefer to stay on-site for the week instead. Call us on +27 81 795 8133 to confirm your start date.

Call +27 81 795 8133
Enrol now
Duration
1 Weeks
Price
R1,700
Accreditation
TETA & CETA
Location
Germiston, Gauteng
Accommodation
Free
Certificate
On Completion

F1, F2, F3 and F4 Forklift Classes — Which Certificate Do You Need?

🏷️ F1 — UP TO 3,000 KG

  • Typical use: Light warehouse picking, small distribution operations
  • Common Benoni employer type: Smaller manufacturing units and light industrial warehouses

    • 🏷️ F2 — UP TO 7,000 KG

  • Typical use: High-throughput warehouse and distribution centre operations
  • Common Benoni employer type: Logistics and warehousing operators near OR Tambo

    • 🏷️ F3 — UP TO 15,000 KG

  • Typical use: Heavy-duty diesel forklifts, industrial site logistics
  • Common Benoni employer type: Apex Industrial's larger manufacturing and cordset production facilities

    • 🏷️ F4 — ABOVE 15,000 KG

  • Typical use: Very heavy-duty lifting, bulk material handling
  • Common Benoni employer type: Heavy engineering firms fabricating mining and industrial equipment

    • WHICH CLASS DO YOU NEED?

    Match your certificate to the rated capacity of the forklift your employer runs — check the data plate or ask your supervisor before enrolling. United Training Centre’s 7-day course covers the F1–F4 curriculum, so whichever class your Benoni workplace needs, you’re trained and assessed against SAQA Unit Standard 242974.

    Why Benoni Employers Require TETA-Accredited Forklift Operators

    The OHS Act requires all forklift operators to hold a formal Certificate of Competency aligned to SAQA Unit Standard 242974 before operating a forklift in any workplace. Benoni’s dense industrial base makes this a constant, active requirement.

    🏭 APEX CORDSET TECHNOLOGIES — AFRICA'S LARGEST POWER CORD MANUFACTURER

    Operating five plants across 14,000m² of manufacturing space in Benoni, Apex Cordset Technologies produces over 120,000 plugs a day. Production and distribution at this scale depends on certified forklift operators moving raw materials and finished goods through the facility every shift.

    🏗️ HEAVY ENGINEERING FIRMS IN APEX INDUSTRIAL

    Firms like Anicic Heavy Engineering, fabricating mining conveyors, mills, crushers and cranes, along with the wider cluster of engineering and fabrication companies in Apex Industrial, require certified forklift operators for materials handling and yard logistics.

    ✈️ PROXIMITY TO OR TAMBO — A GROWING LOGISTICS DRAW

    Roughly 15 minutes from OR Tambo International Airport with direct highway access via the N12, R21 and R23, Benoni is increasingly attracting logistics and distribution operators, adding to demand for certified forklift operators across warehousing facilities.

    🏗️ SHARED INDUSTRIAL NODES WITH BOKSBURG

    Benoni’s Dunswart and Anderbolt industrial areas, shared with neighbouring Boksburg, host a wide mix of manufacturing and engineering employers, all requiring TETA-accredited forklift operators.

    What Does the 7-Day Forklift Operator Training Course Cover?

    Aligned to SAQA Unit Standard 242974 (Operate Counter-Balanced Lift Truck, NQF Level 3, 7 credits), our 7-day programme combines classroom theory with extensive hands-on practical operation.

    THEORY (DAYS 1–2)

  • Forklift machine components and systems
  • Pre-operation inspection and daily checklist
  • OHS Act and Driven Machinery Regulations
  • Load stability, centre of gravity and tipping risks
  • Forklift classes — F1 through F4 and how to identify which one you need
  • Pedestrian safety and workplace traffic management

    • PRACTICAL (DAYS 3–6)

  • Machine startup and shutdown procedures
  • Travelling loaded and unloaded on flat and inclined surfaces
  • Picking up, transporting and placing loads safely
  • Stacking and destacking at height
  • Narrow aisle manoeuvring and reversing
  • Working in busy warehouse and yard environments

    • ASSESSMENT (DAY 7)

  • Written theory assessment
  • Practical competency assessment
  • Certificate issued on the same day for students who pass

    • WHAT IS INCLUDED IN YOUR R1,700

    ✅ All training materials and practical machine time

    ✅ TETA and CETA accredited Forklift Operator certificate — SAQA Unit Standard 242974

    ✅ Certificate issued same day on successful completion

    ✅ Free accommodation available if you’d prefer to stay on-site rather than commute

    Getting to Our Germiston Campus from Benoni

    BY CAR

    Benoni to Germiston is a short trip via the N12 or R21, typically 20 to 30 minutes outside peak traffic.

    BY PUBLIC TRANSPORT

    Minibus taxis run regularly between Benoni and Germiston taxi ranks throughout the day.

    FIRST DAY

    Arrive by 08:30 for a 09:00 start. Bring your South African ID and R1,700 course fee in cash — no advance payment required.

    PREFER NOT TO COMMUTE?

    Free accommodation is available at our Germiston campus for the full week. Call or WhatsApp us on +27 81 795 8133 to confirm your start date and whether you’d like to commute or stay on-site.

    Forklift Operator Salary and Jobs Available in Benoni

    FORKLIFT OPERATOR SALARY IN SOUTH AFRICA

  • Entry Level (0–2 years): R7,000 – R10,000 per month
  • Experienced (2–5 years): R10,000 – R15,000 per month
  • Senior / Foreman (5+ years): R15,000 – R20,000 per month

    • At R1,700 for a 7-day course, forklift training offers one of the best returns on investment of any short course available to Benoni job-seekers.

    JOBS AVAILABLE IN BENONI AND THE EAST RAND

  • Forklift Operator — Apex Cordset Technologies-type manufacturing operations
  • Engineering Yard Forklift Operator — Anicic Heavy Engineering-type fabrication firms
  • Warehouse Forklift Operator — logistics and distribution facilities near OR Tambo
  • General Manufacturing Forklift Operator — Apex Industrial's wider factory base

    • INDUSTRIES HIRING FORKLIFT OPERATORS IN BENONI

  • Steel and heavy engineering
  • Mining services and equipment supply
  • FMCG manufacturing and packaging
  • Warehousing and logistics
  • General industrial and building materials

    • What Benoni Workers Say About Forklift Training at United Training Centre

    "I worked general warehouse duties at a manufacturing plant in Apex Industrial without a forklift certificate. My supervisor said he'd move me onto the forklift once I got certified, but I didn't want to travel far. Germiston was barely a 20-minute drive from Benoni, so I commuted daily instead of staying over. I was back at work the following Monday with my TETA certificate, and my supervisor moved me onto the forklift within the week."
    — Sipho R, Benoni, Gauteng
    TETA Forklift Operator Certificate — United Training Centre

    Learn More From

    Forklift Training Benoni — Frequently Asked Questions

    United Training Centre trains Benoni job-seekers at our Germiston campus, a short drive away. The course is 7 days, R1,700, TETA-accredited and aligned to SAQA Unit Standard 242974. Call +27 81 795 8133 to confirm your start date.
    Our Germiston campus is a short drive from Benoni, typically 20 to 30 minutes via the N12 or R21 outside peak traffic. Minibus taxis also run regularly between Benoni and Germiston if you prefer not to drive.
    No. Benoni is close enough to commute daily, and most of our Benoni students do exactly that. Free accommodation is available if you’d prefer not to travel back and forth each day.
    It depends on the rated capacity of the forklift you’ll operate: F1 up to 3,000kg, F2 up to 7,000kg, F3 up to 15,000kg, F4 above 15,000kg. Check your workplace machine’s data plate or ask your supervisor. United Training Centre’s course covers all four classes.
    SAQA Unit Standard 242974, Operate Counter-Balanced Lift Truck, an NQF Level 3 qualification worth 7 credits, administered under TETA.
    The course costs R1,700 for the full 7-day programme, including all training materials, practical machine time and your TETA-accredited certificate issued on completion. Pay on arrival — no advance payment required.
    Yes. The certificate is TETA and CETA accredited and nationally recognised — accepted by Apex Cordset Technologies, Anicic Heavy Engineering and every South African employer requiring proof of forklift operator competency under the OHS Act.
    Yes. You can combine Forklift Training with TLB, Excavator, Front End Loader or Dump Truck Training in the same visit. Call +27 81 795 8133 to plan a combined schedule.
    No prior experience is required. We train complete beginners from day one. You must be at least 18 years old and medically fit to operate lifting machinery.

    Call or WhatsApp United Training Centre on +27 81 795 8133. We’ll confirm your start date and whether you’d like to commute or stay on-site. Bring R1,700 in cash and your South African ID on your first day.

    Other Accredited Courses for Boksburg and East Rand Workers at Our Germiston Campus

    Excavator Training Benoni
    TLB Training Benoni
    Front End Loader Training Benoni
    Certificate Renewal
    Dump Truck Training Benoni
    Germiston Training Centre

    A Short Drive From Benoni. R1,700. Your TETA Forklift Certificate in 7 Days.

    A TETA-accredited Forklift Operator Certificate — aligned to SAQA Unit Standard 242974, covering F1 through F4 — accepted by Apex Cordset Technologies, Anicic Heavy Engineering and Benoni’s manufacturing and logistics employers. Commute daily or stay on-site for free — your choice.

    32 Bell Street, Nelspruit Central
    +27 81 795 8133
    +27 73 260 7172
    machinery.training247@gmail.com
    WhatsApp Us Now
    Monday to Saturday: 08:00 — 17:30
    Sunday: Closed