BOKSBURG · GAUTENG

Dump Truck Training Alberton
TETA-Accredited ADT & 777 Operator Certificates at Our Germiston Campus

Dump Truck Operator certificate at our Germiston campus — a short drive from anywhere in Alberton. We offer two separate courses: Articulated Dump Truck (ADT) training for R5,000, and 777 Rigid Dump Truck training for R6,500, both 1 week, both aligned to SAQA Unit Standard 101712 (Operate a Dump Truck, NQF Level 2).

Alrode South’s active manufacturing and warehousing expansion, alongside SAB’s recently completed R1.3 billion brewery expansion, both generate bulk material haulage demand for ADT and rigid dump truck operators.

No overnight travel required — Alberton is a short drive from our Germiston campus. Free accommodation is available if you’d prefer to stay on-site for the week instead. Call us on +27 81 795 8133 to enrol.

Duration
1 Weeks
ADT Price
R5,000
777 Price
R6,500
Accreditation
TETA & CETA
Location
Germiston, Gauteng
Accommodation
Free
Certificate
On Completion

ADT vs 777 Rigid Dump Truck — Which Course and Price Applies to You?

🚛 ARTICULATED DUMP TRUCK (ADT) — R5,000

  • Frame: Hinged (articulated) joint between cab and body
  • Best suited to: Rough terrain, wet ground, construction sites
  • Manoeuvrability: High — articulation allows tight turns off-road
  • Common Alberton use: New Alrode South facility construction earthworks
  • 🚛 777 RIGID DUMP TRUCK — R6,500

  • Frame: Fixed rigid chassis
  • Best suited to: Large-scale, high-volume haulage on stable, hard haul roads
  • Manoeuvrability: Lower — wide turning circle, but far higher load capacity
  • Common Alberton use: SAB brewery-scale facility haulage and larger industrial contracts
  • WHICH COURSE DO YOU NEED?

    Check which machine your employer or target job actually runs before enrolling — the two courses are priced separately because they’re different machines with different curricula. If you’re not sure, call us on +27 81 795 8133 and we’ll help you confirm.

    The OHS Act’s Driven Machinery Regulations require all dump truck operators to hold a formal Certificate of Competency aligned to SAQA Unit Standard 101712 before operating a dump truck on any site.

    🏗️ ALRODE SOUTH'S ACTIVE INDUSTRIAL EXPANSION

    As a strategic hub for manufacturing, engineering and warehousing, Alrode South’s ongoing development requires certified ADT and rigid dump truck operators for bulk earthworks and material haulage.

    🍺 SAB'S R1.3 BILLION BREWERY EXPANSION

    The scale of SAB’s recently completed brewery expansion required extensive bulk material haulage, and ongoing facility operations continue to generate demand for certified dump truck operators.

    🚢 CONTAINER DEPOT AND LOGISTICS FACILITY DEVELOPMENT

    New warehousing construction supporting Alrode’s container depot and freight-forwarding operators requires certified dump truck operators for bulk material movement.

    🏭 STEEL FABRICATION AND ENGINEERING WORKS

    Alrode’s steel fabrication and engineering firms require certified dump truck operators for material haulage supporting construction and expansion projects.

    What Does the 1-Week ADT Operator Training Course Cover? (R5,000)

    Aligned to SAQA Unit Standard 101712 (Operate a Dump Truck, NQF Level 2), our 5-day ADT programme combines classroom theory with extensive practical operation.

    DAY 1–2 — THEORY, INSPECTION AND MACHINE KNOWLEDGE

  • OHS Act and Driven Machinery Regulations
  • ADT articulation joint, oscillation hitch and steering cylinder function
  • Payload and load chart interpretation
  • Full pre-shift inspection — TETA-required checklist
  • Rough-terrain and wet-ground handling principles
  • DAY 3–4 — PRACTICAL OPERATION

  • Travel and articulated steering technique on rough terrain
  • Loading position and correct approach under a loading machine
  • Tipping technique on uneven or soft ground
  • Working near loading machines and other site plant
  • DAY 5 — ASSESSMENT AND CERTIFICATION

  • Written theory and practical competency assessment
  • TETA-accredited Dump Truck Operator Certificate (ADT) issued on successful completion
  • WHAT IS INCLUDED IN YOUR R5,000

    ✅ All training manuals

    ✅ Theory and practical assessments

    ✅ TETA-accredited ADT Operator Certificate — SAQA Unit Standard 101712

    ✅ Free accommodation available for students who prefer not to commute

    What Does the 1-Week 777 Rigid Dump Truck Training Course Cover? (R6,500)

    Aligned to SAQA Unit Standard 101712 and CETA Unit Standard 262731 (rigid body dump trucks specifically), our 5-day 777 programme combines classroom theory with extensive practical operation.

    DAY 1–2 — THEORY, INSPECTION AND MACHINE KNOWLEDGE

  • OHS Act and Driven Machinery Regulations
  • Rigid-frame stability, load charts and gradient limits
  • Retarder and braking systems for downhill haul roads
  • Full pre-shift inspection — tyres, rims and wheel nuts
  • DAY 3–4 — PRACTICAL OPERATION

  • Travel and steering technique on stable haul roads
  • Loading position and hauling on level ground and gradients
  • Tipping technique — approach, positioning, controlled body raise
  • Operating on inclines, ramps and dump edges
  • DAY 5 — ASSESSMENT AND CERTIFICATION

  • Written theory and practical competency assessment
  • TETA-accredited Dump Truck Operator Certificate (777 Rigid) issued on successful completion
  • WHAT'S INCLUDED IN YOUR R6,500

    ✅ All training manuals

    ✅ Theory and practical assessments

    ✅ TETA-accredited 777 Operator Certificate — SAQA Unit Standard 101712 / CETA 262731

    ✅ Free accommodation available for students who prefer not to commute

    BY CAR

    Alberton to Germiston is a short trip via the N12 or R59, typically 15 to 25 minutes outside peak traffic.

    BY PUBLIC TRANSPORT

    Metrorail’s Alrode Station and minibus taxis from Alberton connect regularly to Germiston throughout the day.

    FIRST DAY

    Arrive by 08:30 for a 09:00 start. Bring your South African ID and course fee in cash (R5,000 for ADT, R6,500 for 777) — no advance payment required.

    PREFER NOT TO COMMUTE DAILY?

    Free accommodation is available at our Germiston campus for the full week. Call +27 81 795 8133 to confirm which course, your start date, and whether you’d like to commute or stay on-site.

    Dump Truck Operator Salary and Jobs Available in Alberton

    DUMP TRUCK OPERATOR SALARY IN SOUTH AFRICA

  • Entry Level (0–2 years): R9,000 – R13,000 per month
  • Experienced (2–5 years): R13,000 – R20,000 per month
  • Senior / Foreman (5+ years): R20,000 – R28,000 per month (777 rigid haul truck operators on larger sites often earn toward the top of this range)
  • JOBS AVAILABLE IN ALBERTON AND ALRODE

  • ADT Operator — Alrode South facility construction earthworks
  • 777 Rigid Dump Truck Operator — SAB brewery-scale and heavy industrial haulage contracts
  • Container Depot-Linked Facility Support Dump Truck Operator
  • What Alberton Students Say About Dump Truck Training at United Training Centre

    "I worked ground crew for a civil contractor building a new facility in Alrode South, and when a bigger contract came in, the site manager said he needed a certified ADT operator. I checked which machine the contract used before enrolling, did the ADT course at Germiston, and commuted daily since it's manageable. I was back on-site the following week running the ADT."
    — Bongani S, Alberton, Gauteng
    TETA ADT Operator Certificate — United Training Centre

    Learn More From

    Dump Truck Training Alberton — Frequently Asked Questions

    United Training Centre trains Alberton job-seekers at our Germiston campus, a short drive away. We offer both ADT (R5,000) and 777 Rigid (R6,500) courses, each 1 week, TETA-accredited and aligned to SAQA Unit Standard 101712. Call +27 81 795 8133 to enrol.
    ADT (R5,000) covers the articulated dump truck, suited to rough terrain and construction sites. The 777 course (R6,500) covers the rigid-frame dump truck, suited to large-scale, high-volume haulage on stable haul roads.
    R5,000 for the 1-week ADT course, or R6,500 for the 1-week 777 Rigid Dump Truck course. Both include training materials, assessments and a TETA-accredited certificate. Pay on arrival — no advance payment required.
    No. Alberton is close enough to commute daily for either course. Free accommodation is available at our Germiston campus if you’d prefer not to travel back and forth each day.
    SAQA Unit Standard 101712, Operate a Dump Truck, NQF Level 2, administered under TETA. The 777 rigid dump truck course also aligns to CETA Unit Standard 262731, which covers rigid body dump trucks specifically.
    Call or WhatsApp us on +27 81 795 8133. Tell us whether you need the ADT or 777 course, and we’ll confirm your start date and accommodation preference. Bring the correct course fee in cash and your South African ID on your first day.

    A Short Drive From Alberton. ADT R5,000 or 777 R6,500. Your TETA Dump Truck Certificate in 1 Week.

    A TETA-accredited Dump Truck Operator Certificate — ADT (R5,000) or 777 Rigid (R6,500) — aligned to SAQA Unit Standard 101712, accepted by SAB and Alrode’s industrial employer base. Commute daily or stay on-site for free — your choice.

    Germiston Central, Gauteng
    Monday to Saturday: 08:00 — 17:30
    Sunday: Closed